Page 1 of 1

Scissor Bridge’s in Italy

Posted: Mon Oct 26, 2020 11:07 am
by Temujin
A new scissors bridge design was brought out by the British in response to the war, sufficient to support a 24-ton load over 30 ft (9.1 m). This was developed for the Covenanter tank. Eventually, it developed into a 30-ton capacity and therefore was carried by a turretless Valentine tank. It was used in Italy, North West Europe and Burma.

The last three photo’s in this group are taken in Italy, and are from LAC and were taken approx 24 May 1944
78CB7021-F514-456B-AC8D-0B88C8940952.jpeg
78CB7021-F514-456B-AC8D-0B88C8940952.jpeg (81.23 KiB) Viewed 9903 times
5CD13458-60B3-46A4-B8EF-CC4CD39B1963.jpeg
5CD13458-60B3-46A4-B8EF-CC4CD39B1963.jpeg (128.8 KiB) Viewed 9903 times
7E09BF87-27CE-4935-8885-92645BB3537A.jpeg
7E09BF87-27CE-4935-8885-92645BB3537A.jpeg (120.33 KiB) Viewed 9903 times
F218C6B3-E28B-4546-A752-B99C235D3A63.jpeg
F218C6B3-E28B-4546-A752-B99C235D3A63.jpeg (184.52 KiB) Viewed 9903 times